Internal Crossover

The crossover section of the Orion Cobalt CO300..2 and CO600..2 amplifiers is continuously vari- able and extremely flexible..

When using Orion Cobalt loudspeakers, minor deviations from the recommended frequency ranges can provide superior results depending on your speaker locations and your vehicle acoustics.. Setting crossover frequencies higher than recommended will not cause damage and may provide superior sonic results depending on your system's performance goals.. Refer to your loudspeaker owner's manual for assistance in choosing the proper crossover frequencies for your system..

Low-Pass Crossover

The low-pass crossover is active with a 2nd order (12dB per octave) slope.. The low-pass crossover is continuously variable from 50Hz to 500Hz..

High-Pass Crossover

When the switch is to the left (FULL position), the high-pass crossover is bypassed.. When the switch is to the right (HPF position), the high-pass crossover is active.. The high-pass crossover is continuously variable from 50Hz to 500Hz..

Amplifier Wiring

Power Connections for the Orion Cobalt CO300.2 and CO600.2

Orion Cobalt CO300..2 Fuse Size: 1 x 25 AMP ATC / CO600..2 Fuse Size: 2 x 20 AMP ATC

Power connections accept up to 4 AWG wire..

4 AWG power and ground wire recommended for optimal performance..

Connect 12V+ to the battery through fuse holder.. This connection provides +12V main power to the amplifier..

Power wire must be fused no more than 18" from battery..

Ground amplifier to a good chassis ground as close as possible to the amplifier..

Connect REM terminal to remote turn-on lead from source unit.. This connection pro- vides +12V power to turn-on the amplifier..

Add extra ground wire between the negative terminal of the battery and the chassis..

Speaker Wiring Diagram CO300.1/CO600.2

The Orion Cobalt CO300..2 and CO600..2 amplifiers offer two positive and two negative output termi- nals for ease of connecting the speakers to the amplifier.. Each amplifier is stable to 2Ω per channel or 4 ohm bridged ..

BridgedStereo

- + - +

- + - +

Figure 5

Figura 5

Abbildung 5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2Ω or 4Ω

 

 

4Ω or 8Ω

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2Ω or 4Ω

© 2007 directed electronics—all rights reserved

Page 7
Image 7
Orion Car Audio C0600.2, C0300.2 owner manual Amplifier Wiring

C0600.2, C0300.2, Amplifier specifications

Orion Car Audio has been synonymous with powerful and high-quality sound amplification for years, and their amplifiers C0300.2 and C0600.2 exemplify this legacy. Designed for car audio enthusiasts looking for robust performance and reliability, these models are packed with innovative features that ensure an exceptional listening experience.

The Orion C0300.2 is a compact yet powerful two-channel amplifier that delivers a peak power output of 300 watts. It is engineered with a Class AB topology, combining the efficiency of Class D with the audio fidelity of Class A, making it suitable for a variety of audio systems. Its adjustable gain control allows users to fine-tune the amplifier to match their specific car stereo setup, ensuring that every note is crisp and clear. The C0300.2 also incorporates a built-in crossover system that lets users set the frequency range for each channel, resulting in optimized sound output tailored to the speakers being used.

On the other hand, the C0600.2 amplifier steps things up with a more powerful output, reaching a peak of 600 watts across its two channels. This amplifier is ideal for those who desire a high-impact audio experience, delivering deep bass and pristine highs. Similar to its counterpart, the C0600.2 employs a Class AB design, allowing for high efficiency and better thermal management. This feature ensures that even during extended playback, the amplifier remains cool, preventing overheating and potential damage to the internal components.

Both amplifiers boast a sleek design with a durable chassis, providing not only robust performance but also an aesthetic that fits well within modern car interiors. The integrated short circuit and thermal protection circuits safeguard the amplifier against potential damage, adding to the reliability that Orion is known for.

In addition to their powerful output and efficient designs, both models offer flexibility in installation with multiple mounting options and a user-friendly interface. These features make the C0300.2 and C0600.2 amplifiers perfect choices for anyone looking to enhance their vehicle's audio system, delivering performance that meets the demands of car audio enthusiasts everywhere.

With features designed to maximize sound quality and system compatibility, the Orion Car Audio amplifiers stand as a leading choice for those who appreciate superior audio performance in their vehicles. Whether for daily commuting or enjoying long road trips, these amplifiers elevate the driving experience to a whole new level.