Use the USB port and a wired print server
1 Connect the print server to the printer using a USB cable.
2 Connect the print server to the network using an Ethernet cable. See the setup information provided with the print server.
3 Follow the instructions provided with the print server to set it up on the network, and then see “Set the Data Format” on page 34.
Tips for Success
•Be sure to record the print server name or IP address, which you need to send print jobs from a computer. Work with your network support personnel if needed to obtain the print server name and IP address.
•You do not need to perform the steps in “Set up the network printer” on page 30. Instead, set up the print server on the network (step 3 above).
Page 28
