7Press the Enter key to display the subnet mask.
8Press the Enter key to return to the Status menu. “Gateway Addr” is displayed on line 2.
9Press the Enter key to display the gateway address.
10Press the Enter key to return to the Status menu. “MAC Address” is displayed on line 2.
11Press the Enter key. The MAC address, which is set in the factory, is displayed on line 2.
If the MAC address needs to be changed, contact your Datacard service provider.
12Press Enter to return to the Status menu. “Exit” is displayed on line 2.
13To print cards, press the Enter key repeatedly to return to the “Printer Ready” display.
Page 52
