Page 27
Connect the printer to the network
To connect the printer to the network, use one of the following methods:
•Connect the printer using the Ethernet port (requires an SP Series Card Printer with
•Connect the printer using the USB port and a wired print server (the HP Jetdirect 175x, revision C, has been tested in this usage)
•Connect the printer using the USB port and a wireless print server (the HP Jetdirect 380x, revision A. has been tested in this usage)
On operating systems with permissions, such as Windows XP, make sure you are logged in as the Administrator during setup. If networking is set up on the computer, log into the network.
Use the Ethernet port
1Attach the Ethernet cable to the Ethernet port on the printer and to the port for the network.
2Continue with “Set up the network printer” on page 30.
Power Cable | Printer |
|
Network Data Cable
