Page 33
—Press the Enter key. The current value appears with the cursor under the first byte. Use the same process as for the IP address to set the subnet mask. When you press the Enter key after the fourth byte, “Gateway Addr” appears.
—Press the Enter key. The current value appears with the cursor under the first byte. Use the same process as for the IP address to set the gateway address. When you press the Enter key after the fourth byte of the gateway address, “Apply/Restart” appears.
9Press the Enter key to apply the value(s) and restart the printer.
The Status light shows amber (yellow) and then blinks green. Internal printer components move and the LCD panel changes to show “Printer Ready” on the first line.
