
CROSSOVER POINTS & SPEAKER POLARITY PHASE SHIFT PROBLEMS
25Hz | 31.5Hz | 40Hz | 50Hz | 63Hz | 80Hz | 100Hz | 125Hz | 160Hz | 200Hz | 250Hz | 315Hz | 400Hz | 500Hz | 630Hz | 800Hz | 1000Hz | 1250Hz | 1600Hz | 2000Hz | 2500Hz | 3150Hz | 4000Hz | 5000Hz | 6300Hz | 8000Hz | 10000Hz | 12500Hz | 16000Hz | 20000Hz |
34
USER INTERFACE LED INDICATORS
“CLIP“ - When illuminated, indicates the EQ has clipped its output. There are three solutions to this problem: Reset input gains, turn down source unit (if using analog input) or lower boost on boosted frequencies.
“L” & ”R“ - Indicates which channel is to be equalized. In the default setting, both LEDs are illuminated indicating that both the left and right channels can be adjusted simultaneously. The channels are “LINKED.”
When only the “L” LED is illuminated, only the left channel is being adjusted. The channels are “UNLINKED.”
When only the “R” LED is illuminated, only the right channel is being adjusted. The channels are ”UNLINKED.”
NOTE: When channels are unlinked, the left and right equalization can be adjusted independently.
19