FULL FLUSH MOUNTING

Step 1:. Determine where the tweeter will be mounted.. Make sure there is a flat area large enough for the tweeter and no obstructions behind the area..

Step 2: Using the back half of the tweeter housing, mark with a pen the hole needed for the tweeter..

Step 3: Be sure the hole is large enough for the tweeter housing, but not so large that the flange will not cover the hole.. .

Step 4: Cut the hole for the tweeter.. When using factory locations, this step can be skipped.. A hole can be cut either with a pair of metal tin snips or a 2" hole saw for hard materials..

WARNING: Check for clearance of window mechanisms and electrical wires BEFORE you drill..

Step 5: Install tweeter in flush mount housing..

Step 6: Connect the speaker wires observing the correct polarity..

Step 7: Install tweeter and housing in the hole cut for mounting, so that the trim ring is flat with the front of the surface..

Step 8: Use the supplied pressure ring to secure the housing to the surface..

TWEETER

TWEETER CUP

PRESSURE RING

Figure 3

 

FLUSH

Figura 3

 

 

MOUNT

 

Abbildung 3

TRIM RING

 

TWEETER WIRE

PANEL

 

 

 

 

 

WIRING HARNESS

Installing the Crossover

Step 1: Find a location for the crossover away from any factory or after market electrical wires.. It is recommended to mount the passive crossover close to the amplifier.. In the event you decide to upgrade and bi-amplify the system, mounting the passive crossover close to the amplifier would simplify the installation upgrade..

Step 2: Remove top cover of crossover housing.. Don’t lose it..

Step 3: Mark with a marking pen the two mounting holes..

Step 4: Remove crossover and pre-drill mounting holes using a 1/8” drill bit..

WARNING: Check for clearance of window mechanisms and electrical wires BEFORE you drill..

Step 5: Mount the crossover using the supplied #8 screws..

© 2010 directed electronics—all rights reserved

5

Page 6
Image 6
Orion Car Audio HCCA62, HCCA52 owner manual Installing the Crossover, Full Flush Mounting

HCCA62, HCCA52 specifications

Orion Car Audio has long been recognized for its commitment to high-quality sound and innovative technology. Their HCCA series, particularly the HCCA52 and HCCA62 models, epitomize this dedication by combining impressive power handling with advanced design features. The HCCA52 is a 5.25-inch speaker that offers an astonishing balance between size and sound performance. It is designed to deliver high output levels while maintaining clarity and precision across a wide frequency range. With a peak power handling of 400 watts and an RMS rating of 200 watts, this speaker is capable of filling any vehicle with exceptional audio quality without distortion.

One of the standout features of the HCCA52 is its lightweight, yet sturdy, polypropylene cone, which contributes to the speaker's efficiency and durability. The cone is paired with a high-quality rubber surround, which enhances the speaker's longevity while allowing for significant excursion. The treated cloth dust cap aids in reducing unwanted resonances, allowing for a clearer sound performance. Additionally, the oversized voice coil increases power handling and ensures reliability during high-volume playback.

On the other hand, the HCCA62 is a 6.5-inch model that caters to those seeking a more robust performance. With an impressive peak power handling of 600 watts and an RMS of 300 watts, the HCCA62 can accommodate larger vehicles and bigger sound requirements. The drive system utilizes a similar polypropylene cone and rubber surround configuration found in its smaller counterpart, ensuring durability and responsiveness.

Both models feature advanced technologies such as vented pole pieces that enhance cooling and increase efficiency, leading to longer playtime without risking damage from overheating. The HCCA series also benefits from a unique tweeter design, which allows for extended high-frequency response and excellent imaging. By utilizing neodymium magnets, the tweeters provide crisp treble that complements the rich bass produced by the main speakers.

Other characteristics include high sensitivity ratings, which ensure that these speakers can produce loud volumes with less power input, making them ideal for use with various head units and amplifiers. The HCCA series is also engineered for easy installation, featuring versatile mounting options that fit seamlessly into a wide range of vehicle models.

In summary, the Orion Car Audio HCCA52 and HCCA62 are engineered for audio enthusiasts seeking exceptional sound quality, durability, and performance. Their combination of innovative design, powerful handling capabilities, and advanced technologies make them a top choice for those looking to upgrade their car audio system.