Orion Car Audio XTREME 600.4 owner manual RGC-1

SYSTEM PLANNING

System 2 is a two-way front / rear boomer system. Amplifier 1 powers front and rear separates. Amplifier 2 powers four 4 ohm subwoofers. This sys- tem also has a RGC-1 for dashboard con- trol of the bass level.

Amplifier 1

∙Lowest recommended impedance is 2 ohms stereo

∙Front and rear channels configured for stereo operation

∙Front and rear channels set for high- pass operation

∙2ch / 4ch input selector configured for 2 channel input

Amplifier 2

∙Lowest recommended impedance in 2 ohms stereo

∙Front and rear channels configured for summed stereo operation

∙Front channels configured for low-pass operation with INTELLiQ.

∙Rear channel input configured from crossover and gain output of chan- nels 1 & 2

∙RGC –1 connected to front gain point controls bass level for entire system.

SYSTEM 2

RGC-1

+ + + +

– + – – – – + –

–	+		+	–
+	+	+		+
–	–	–		–

+ – + – – + – +

Note: INTELLiQ is a trademark feature of ORION amplifiers that maximize the performance of any subwoofer system for information regarding the setup of INTELLiQ please refer to the crossover section of this manual that explains INTELLiQ.

page 13