RCA INPUT / CH 1 & 2 XVR
The RCA Input / 1 & 2 XVR push button switch configures the input for Channels 3 & 4. The feature allows the more advanced crossover features of the front channels to be routed to both the front and rear channels. Configured in this manner, INTELLiQ is now available on all channels of the amplifier as well as bandpass crossovers for midbass and midrange speakers.
When the switch is disengaged, the rear RCA input feeds channels 1 & 2.
When the switch is engaged, channels 3 & 4 receive input signal from the output of channels 1 & 2 after the crossover output. When the switch is in engaged, signal from the front RCA input is routed to the rear RCA inputs. The front gain control controls the level of the entire amplifier. The rear gain controls are deactiviated.
REAR INTERNAL CROSSOVER CONFIGURATION
The XTREME 600.4 use
When the switch is in the “OFF” position, the crossover section of the amplifier is bypassed. Amplifier output is full range.
When the switch is in the center position, the crossover is configured for
page 25
