INSTALLATION
The installation of all ORION components will determine the overall performance result. Improper installation will not only limit the performance of your ORION system but also potentially compromise the reliability of this amplifier. To ensure proper sonic results and component reliability, please refer to your Authorized ORION dealer for installation assistance or advice. If you decide to perform the installation yourself, read the entire installation section of this manual before beginning installation.
TOOLS OF THE TRADE
Listed are the majority of the tools required to perform the installation. Having the proper tools will make the installation much easier. Some of these tools are necessities. Some make the job much easier.
• | marking pen | • | heat shrink tubing |
• | electric drill with assorted drill bits | • | nylon tie straps |
• | utility knife | • | |
• | Phillips and flat blade screw drivers | • | wire cutters |
• | pliers (standard and needle nose) | • | wire crimpers |
• | wire brush or sandpaper for chassis grounding | • | wire strippers |
•solder iron and solder
page 18
