Packard Bell M3600 manual Bios Security Features

BIOS Security Features

Field	Description	Value
Supervisor Password	Displays the supervisor password status. When set to Installed, this	Installed
	password will allow the user to access and change all settings in the	Not Installed
	Setup Utility.
User Password	Displays the user password status. Only the following menus will be
	accessible when this password is set as Installed:
	• System Date and System Time
	• Exit Without Saving
Change Supervisor	Press Enter to change the supervisor password.
Password
Change User	Press Enter to change the user password.
Password

Note the following before you define a system password:

•The maximum length of password contains 8 alphanumeric characters. The following keys are valid:

–A-Z, a-z (case-insensitive)

–0-9

–` - + [ ] \ ; ' , . /,

–Special keypad characters: 0-9 / * - +

•When you are prompted to enter a password, you have three tries before the system halts. Do not forget your password. If you forget your password, you may have to return your computer to your dealer to reset it.

20 Packard Bell oneTwo M3600 AIO Computer Service Guide