Troubleshooting
Please read the user's manual carefully before using the unit. If you have any troubles in using this player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble after using all the suggestions, please contact our company or the technical service centre authorised by us. For the sake of your safety, please do not open the cover and repair the player by yourself, if that, it may cause electric shock.
NO POWER
Check whether the power or battery is connected well.
NO SOUND BUT HAVE PICTURE
Check whether you have turned down the volume.
NO PICTURE
Check whether the TFT Power switch is chocked in the hole.
Check whether the OUT/IN switch is set as IN, and no signal input from CVBS jack.
ABNORMAL DISPLAY OF THE COLOUR OR BRIGHTNESS
Please setup the player in STOP mode with your remote controller, open the menu, select the defaulted setup to resume.
BLACK AND WHITE POINTS IN SCREEN
The LCD monitor made by high precision technology, it is normal for 0.01% of the Pels to appear black or white points.
REMOTE IS INSENSITIVE OR DOES NOT WORK
Check the battery of remoter and make sure that they are to be powerful and good conductivity.
Direct the remote controller to the IR sensor of the player.
Check whether there are some obstacles between the remoter and IR sensor.
THE PLAYER TURNS OFF AUTOMATICALLY
Under the screen saver mode, if there is no operation in 10 minutes, to save the power, the player will turn off automatically.
CAN NOT WORK WITH THE BATTERY
Power of the battery is insufficient. Try to unload the battery and connect the adaptor to the player, then put on the battery to charge.
38
