TV Function
16
Basic Operation Connect the antenna to the antenna jack on the unit rear panel.
After connection, connect the power supply cord. If the player is in standby mode, press the
POWER button to turn on the power.
Press the SOURCE button to select the TV mode.
Press the , (direction buttons) on the remote control, or use the number buttons directly, to
select the channel that you wish to view.
You are recommended to take through the following steps when the device is for the first time in
operation.
General Setup
Press the LCD SETUP button three times repeatedly on the remote control to access the TV setup
menu and select correct colour and sound system.
In this menu, use the , buttons to select items you want to set, press the , buttons to select,
press the OK button to exit from the menu.
Language
Press the , buttons to select the menu language.
Reset
Select RESET to resume the default status.
Under TV mode, select "RESET" in setup menu, press the button, then the multiple
Parameter set up in LCD setup menu will resume to the original status.
SYSTEM
Use the , button to highlight SYSTEM item. Use the , button to select B/G, M, L, D/K and
I. The system may be varied depending on the state the product soled.
GENERAL
LANGUAGE
RESET
SYSTEM
ENGLISH
B/G