Remote Control

34.

Press to search forward under DVD mode.

35.

Press to search backward under DVD mode. While in DVD mode, if LCD setup menu is used, the buttons for DVD operation on the remote control is not available.

Preparation of Remote Control

Insert the batteries while observing the correct

(+) and (-) polarities.

1.Refer to the drawing, take the back cover off of the remote control and remove the empty battery receptacle.

2.A separating film was applied to the battery for shipment. Remove this film.

3.Insert the battery into the receptacle and insert the receptacle into the remote.

4.Under normal use the battery will last for six months.

5.Take out battery when the remote is not in use for a long time.

Using of Remote Control

Point the remote control unit from no more than about 7m from the remote control sensor and within about 60 degrees of the front of the unit.

The operating distance may vary depending to the brightness around.

Notes:

Do not point bright lights directly at the remote control sensor.

Do not place objects between the remote control unit and the remote control sensor. Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment.

11

Page 12
Image 12
Palsonic TFTV1720D user manual Preparation of Remote Control