Playback Functions
Switching On and Off, Stand-by
Connect the main cord to a wall outlet with a voltage corresponding to the specifications on the rear panel of the unit.
1.Press the POWER button on the upside panel to switch on the unit. You can operate all functions using the remote control (r/c). Additionally, many functions have buttons at the unit as well.
2.Press the SOURCE button to shift to
If no disc is inserted yet, the display shows:
NO DISC
3.To set the unit into standby mode press the POWER button on the r/c. In standby mode the unit is supplied with main voltage but not active. In this condition you can switch on the unit using the POWER button on the r/c.
4.Correctly put the disc into the disc tray.
Label Side
5.Playback starts automatically, usually DVD discs now shows a menu to choose from. You can control this menu with the direction buttons.
Mark the desired option and press the OK to activate it. Mostly you find additional information about the DVD's content on its sleeve.
6.To interrupt playback press the STOP once. The screen shows "Press Play Key To Continue". So the player memorizes the location where the playback was stopped. Press the PLAY button to resume playback there.
But if you press the STOP button twice the unit completely stops and won't remember the last position.
Maybe not all discs support "resume play".
If this symbol appears on the screen while pressing a button the unit can't carry out the desired function, cause it's not supported by either the DVD inserted or the current operating mode.
26
