System Connections (Continued)
Connecting TV Antenna
Connect TV signal source to the TV jack on the jack panel of the unit.
TV |
PC IN |
AUDIO |
After connection, turn on the unit and press the SOURCE button to shift to TV mode. If you have been scanned TV programs, take the following steps to select a channel.
1.Channel Numbers 0-9
Press the number button to select the channel, after a few seconds the selected channel will display- or
Press the number button to select the channel and then press the 
/+10 button to go to the selected channel immediately- or
Press 0 followed by the channel number to go to the selected channel immediately.
2.Channel Numbers
Press the number button to select channel XX, after a few seconds the selected channel will display- or
Press the number button to select channel XX, and then press the 
/+10 button t go to the selected channel immediately.
* X denotes the channel number.
14
