Panasonic 30003 manual When removing the control panel stand cover

When removing the control panel stand cover

1.Insert the head of a flat-tip screwdriver in the gap under the mark (O).

2.Push the bottom tab of the cover up to lift the cover.

3.Perform the same procedures as 1 and 2 above for the other gap.

4.Pull the cover up diagonally.

•Performing this procedure with the allen key or a Phillips screwdriver could damage the unit.

4 Raising the backrest to the upright position

1.Insert the power plug into the power outlet.

2.Confirm the key lock is set to the “open” position.

3.Confirm the power switch is set to the “on” position.

4.Press the button on the control panel twice.

The backrest will rise to the upright position automatically.

Gap

	2	Flat-tip
		screwdriver
		(Not included in
		the standard
1		configuration)

2

13