3D FINE function

As the left and right lenses are linked, you normally do not need to adjust them.

If you wish to perform fine adjustments between the two lenses, the 3D FINE function allows you to adjust the vertical position of the images, focus and iris.

MENU

EXEC

PUSH

 

ENTER

 

AUDIO MON/ADV

1 Perform zoom adjustment (Page 34), focus adjustment (Page 36) or brightness adjustment (Page 37).

2 Press the EXEC button.

The fine adjustment screen is displayed.

3 Adjust the vertical position of the images, focus and iris finely.Vertical position of the images (VERTICAL): Tilt the Operation lever in the

directions. The image from the right lens

moves upwards by tilting it in the

direction,

and downwards by tilting it in the

direction.

•This product is preadjusted at the factory

to minimize vertical misalignment.*1 The specification for vertical misalignment is 1.2 % or less.

*1 It is indicated in percentage of vertical misalignment between the images from the left and right lenses at the center of the screen according to the effective height of the screen, when measured under the following conditions: the zoom position at the maximum wide-angle (Z00), the convergence point in the center (C50), and shooting a subject at a distance of 4.3 m.

Focus (FOCUS): Tilt the Operation lever in

the directions. The focal length for the right lens is increased by tilting it in the direction, and is reduced by tilting it in the direction.

Iris (IRIS): Press the AUDIO MON/ADV

+/- buttons. The iris of the right lens is opened by pressing the + button, and is closed by pressing the – button.

4 Press the EXEC button to confirm the adjustments.

•When the adjustment screen of the 3D FINE function is being displayed, only the MIX button and the USER button with R-IMAGE allocated operate. The other buttons are not operative.

•The fine adjustment value is cleared when a zoom operation, focus adjustment, or brightness adjustment using the IRIS/CONV. dial is performed after the adjustment.

•The fine adjustment value is cleared when the power of the unit is turned off.

Shooting

45