You can perform any of the following operations. If necessary, make preparations prior to undertaking the operations.
Loading the metadata•Load the metadata recorded on the
Initializing the metadata inside the unit Displaying the metadata inside the unit
1 Press the mode button and select CAMERA mode.2 Press the MENU button.
• Menu operation (Page 75)
| 3 Tilt the lever in the | directions to select | ||
| META DATA, and push the Operation lever | |||
| (or tilt in the direction). | |||
| CAM MENU | 2/2 | |
| DISPLAY SETUP |
|
|
| CARD FUNCTIONS |
|
|
META DATA
OTHER FUNCTIONS
4 Tilt the Operation lever in the 
directions to select item, and push the Operation lever.
META DATA | 1/2 |
|
|
CARD READ | NO |
|
|
RECORD | OFF |
|
|
USER CLIP NAME | TYPE1 |
|
|
CLIP COUNT RESET | NO |
|
|
META DATA PROP | NO |
Read metadata set to the SD Memory Card with the camera.
Move to LOAD, push the Operation lever, select whether or not to read the metadata (YES/NO), and push the Operation lever again.
�Up to 10 items of metadata on the SD Memory Card can be displayed, starting from the most recent date of production.
�If characters other than
Select this to set whether to record the metadata to be loaded into the unit simultaneously on the SD Memory Cards. Select ON to record the metadata or OFF to cancel the recording, and push the Operation lever.
The factory setting for this mode is OFF.
USER CLIP NAME:
The USER CLIP NAME recording method is selectable. (For details: Page 52)
CLIP COUNT RESET:Reset the counter value to 1.
Select whether or not to reset (YES/NO), and push the Operation lever.
META DATA PROP:Select this to display the metadata which has been recorded in the unit.
META INITIAL SET:Select this to initialize the metadata which has been recorded in the unit.
Select YES to initialize the metadata or NO to cancel the initialization, and push the Operation lever.
5 Press the MENU button to release the menu mode.Shooting
51