Precaution for use (continued)Lens attachment and detachment

Check that the power switch is set to OFF.

Attaching a lens to the camera

1 Turn the lens rear cap and body cap in the direction indicated by the arrows and remove.

Lens detachment button Body capLens rear cap

Do not insert fingers into the mount.

2 Line up the lens attachment marks (red) on the camera and lens, and then turn the lens in the direction indicated by the arrows until it audibly clicks into place.

Do not press the lens detachment button while attaching

the lens.

• Damage may occur to the lens attachment if the lens is not at right angles to the camera during attachment.

• Ensure that the lens is attached properly.

3 Remove lens cap.

Remove lens cap prior to recording.

10