SW MODE screen (continued)

Item

Display

 

 

Description of settings

 

 

mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USER1 SW

(Camera)

Sets the function assigned to the USER1 button.

 

 

 

(PB)

INH:

 

No function is assigned

 

 

 

 

REC CHECK:

 

Performs recording check.

 

 

 

 

FACE DETECT:

This is the face detection function. Performs the AUTO IRIS /

 

 

 

 

 

 

AUTO FOCUS operation centering around the detected face.

 

 

 

 

 

 

Enabled when both focus control and iris control are set to

 

 

 

 

FA:

 

auto.

 

 

 

 

 

Displays the edges in red. (Only for LCD/EVF) During

 

 

 

 

CAPTURE:

 

operation, the LCD/EVF borders are displayed in red.

 

 

 

 

 

Records still images. Does not operate during movie recording

 

 

 

 

ATW:

 

and when the PRE REC function is in use.

 

 

 

 

 

Switches the ATW function ON or OFF.

 

 

 

 

ATW LOCK:

 

Fixes the white balance value when the button is pressed

 

 

 

 

SHOT MARK:

 

during ATW. Press again to perform ATW.

 

 

 

 

 

Shot mark recording. (Page 13) Takes effect during recording,

 

 

 

 

INDEX:

 

thumbnail display, and clip display.

 

 

 

 

 

Index recording (Page 13) Takes effect during recording.

 

 

 

 

LAST CLIP:

 

Deletes the last recorded clip. (Page 13)

 

 

 

 

• After recording, clips cannot be deleted by switching to PB or PC mode, by

 

 

 

 

changing the recording format, or by turning off the camera.

 

 

 

 

BACKLIGHT:

 

Auto iris control for the backlight compensation.

 

 

 

 

 

 

 

 

SPOTLIGHT: Switches auto iris control ON or OFF for the spotlight.

 

Menu

 

 

BLACKFADE: Blackfade (Page 11)

 

 

 

WHITEFADE: Whitefade (Page 11)

 

USER2 SW

(Camera)

Assign a function to the USER2 button.

 

 

 

(PB)

The setting contents are the same as USER1.

 

 

 

 

 

 

ATW LOCK

 

 

 

 

USER3 SW

(Camera)

Assign a function to the USER3 button.

 

 

 

(PB)

The setting contents are the same as USER1.

 

 

 

 

REC CHECK

 

 

 

 

WFM

(Camera)

Switches the waveform display that appears when the WFM button is pressed.

 

 

 

 

WAVE:

 

Displays as a waveform.

 

 

 

 

VECTER:

 

Displays as a vector.

 

 

 

 

WAVE/VECTOR:

Each time the button is pressed, the setting changes in the

 

 

 

 

 

 

following order: OFF → WAVE → VECTOR → OFF.

 

 

S/S SW INH

(Camera)

1: Disables the START/STOP1 SW.

 

 

 

 

2: Disables the START/STOP2 SW.

 

 

 

 

NO: Does not disable any switch. Use to prevent erroneous operation of the

 

 

 

 

unnecessary START/STOP SW.

 

 

FACE

(Camera)

Frames the faces detected during operation of the FACE DETECT function with

 

 

FRAMING

 

the USER SW.

 

 

 

 

 

The maximum number of detected frames is 15, and faces bigger and closer to

 

 

 

 

the center of the screen are given priority.

 

 

 

 

OFF:

Frames are not displayed.

 

 

 

 

PRIMARY:

Only the high-priority frames are displayed.

 

 

 

 

ALL:

Cannot be set when you are using INTERVAL REC.

 

 

indicates the factory setting.

55