Setup menu list (continued)

AV IN/OUT SETUP screen

Item

Display

 

Description of settings

mode

 

 

 

 

 

 

 

 

 

 

 

 

SDI & HDMI

(Camera)

Sets the output video format of the SDI&HDMI OUT terminal.

OUT SEL

(PB)

1080i/720P: Output at the resolution set in REC FORMAT.

 

 

DOWNCONV: SDI is output at 480i, while HDMI is output at 480p. (When

 

 

 

SYSTEM FREQ = 59.94) SDI is output at 576i, while HDMI is

 

 

 

output at 576p. (When SYSTEM FREQ = 50)

SDI OUT

(Camera)

Sets the video output from the SDI terminal.

 

(PB)

ON:

Video is output from SDI OUT. At this point, simultaneous LCD display

 

 

 

and EVF display is not supported. Close the LCD monitor when using

 

 

OFF:

EVF.

 

 

No video is output from SDI OUT.

SDI 24PsF

(Camera)

Sets the video format output from SDI OUT to 24PsF.

 

(PB)

ON:

Operates only when REC FORMAT = 1080 24p. Does not operate

 

 

 

during VFR operation (when the recording format is other than 24p).

 

 

OFF:

The HDMI output stops during 24Psf output.

 

 

SDI output is in the 1080 60i format.

 

 

• This item is not available when SYSTEM FREQ = 50Hz.

SDI EDH

(Camera)

Sets superimposition of EDH on to the SDI output during SD SDI output.

 

(PB)

ON:

Superimposes EDH.

 

 

OFF:

Does not superimpose EDH.

DOWNCON

(Camera)

Switches down-conversion output mode.

MODE

(PB)

SIDE CROP: Side-crop mode (Crops the left and right edges.) Images may

 

 

 

extend beyond the boundaries of the screen and be partially unable

 

 

 

to be seen when outputting from the +H227A/V terminal or SDI

 

 

 

OUT terminal (during DOWNCONV), or the HDMI terminal (during

 

 

 

DOWNCONV).

 

 

LETTER BOX: Letterbox mode (Adds black bands at the top and bottom of the

 

 

 

image.

 

 

SQUEEZE: Squeeze mode (Squeezes images horizontally.

HP MODE

(Camera)

Selects the sound heard from the headphones.

 

 

LIVE:

The sound input from the microphone is output as is. This setting is

 

 

 

selected when delays in the sound are annoying.

 

 

RECORDING:

 

 

The sound in the status to be recorded (the sound synchronized with the

 

 

images) is output.

TEST TONE

(Camera)

Sets test tone output to channels 1, 2, 3, and 4 when BARS setting is ON.

 

 

ON:

Outputs the test tone.

 

 

OFF:

Does not output the test tone.

VIDEO SETUP

(Camera)

Sets the setup level of video signals.

 

(PB)

0%:

VIDEO OUT terminal output and recording setup levels will both be set

 

 

 

to 0%.

 

 

7.5%A: VIDEO OUT terminal output setup level will be set to 7.5%, while

 

 

 

recording setup level will be set to 0%.

 

 

• This item is not available when SYSTEM FREQ = 50Hz.

AUDIO OUT

(Camera)

Sets the audio signals to output from the AUDIO OUT terminal (A/V OUT).

 

(PB)

CH1/CH2: CH1 terminal = CH1 signals, CH2 terminal = CH2 signals

 

 

CH1:

CH1 terminal = CH1 signals, CH2 terminal = CH1 signals

 

 

CH2:

CH1 terminal = CH2 signals, CH2 terminal = CH2 signals

 

 

• When an SD Memory Card containing 5.1 channel content recorded on another

 

 

equipment is played back on the camera, it is down-mixed to 2 channels when

 

 

output through the AUDIO OUT and headphone terminals.

 

 

 

 

 

indicates the factory setting.

58