Panasonic AG-AF100P YES NO, NO CARD, WARNING, Displays, REC STOPPED, NOW WRITING, REPAIR CLIP, REC WARNING, SYSTEM ERROR, NOW ACCESSING, WRITE PROTECT, CANNOT RECORD

■■N

NO CARD

No card is inserted.

NOW ACCESSING.PLEASE DO NOT REMOVE CARD.

Card is currently being accessed. Please do not remove the card.

■■R

REC STOPPED.NOW WRITING.

Video recording has been stopped. Data is now being written to the card.

REPAIR CLIP?

Do you wish to repair clips now?

■■S

SD CARD FORMAT?YES NO

Do you wish to format the SD Memory Card now? Yes/No

SET DATE AND TIME

Set the date and time.

■■T

THE CLIP IS PROTECTED.PLEASE CANCEL PROTECTION.

The clip is protected. Please cancel the protection.

THE RECORDING IS STOPPED (OVER THE LIMITATION)

Recording will stop. (Continuous recording for 12 hours)

THE TC MODE IS CHANGED TO "NDF"

NDF is selected as the TC MODE setting.

THIS BATTERY CANNOT BE USED.

This battery cannot be used.

THIS CARD CANNOT RECORD IN VIDEO MODE.

The card cannot be used for video recording.

THUMBNAIL DATA ERROR IS DETECTED.

An error has been detected in the thumbnail information.

■■U

UNABLE TO FORMAT.

The card cannot be formatted.

■■W

WRITE PROTECT

The card is write-protected.

Error displays

The following messages are displayed when an error has occurred in the camera or the SD Memory Card. If the problem is not solved by switching the power off and back on again, either change the card in accordance with the instructions displayed, or consult the place of purchase.

■■C

CANNOT RECORD

Displayed when an error has occurred during
	Displays
recording.
■■R
REC WARNING
Displayed when an error has occurred during
recording. Start the recording again. If the
message appears again, please consult the
place of purchase.

•Please switch the power off if the message continues to appear.

•Please try inserting a different card if the message appears again after restarting recording.

■■S

SYSTEM ERRORTURN POWER OFF

Displayed when an error has occurred in the system. Switch the power off and back on again.

•If this error is displayed when accessing the SD Memory Card, such as when deleting a clip, the SD Memory Card may be damaged. Please replace it with a new SD Memory Card.

•If this error is displayed when repairing the SD Memory Card, please use the AVCCAM Restorer content repair software (Page 38 of Vol.1).

■■W

WARNING

Displayed when an error has occurred with the camera itself. Start the recording again. FOCUS NG (error with focus operation)

PSD NG (error with jitter detection)

49