Panasonic AG-DVC7P Setting Date and Time Internal Lithium Battery Recharge, LP Mode, Before Use

Before Use
Setting Date and Time	Internal Lithium Battery Recharge

Since the internal clock of the Camera Recorder has a slight imprecision, make sure to check the time before recording.

1 Set [OTHER FUNCTIONS] >> [CLOCK SET] >> [YES].

W.B/SHUTTER/IRIS

> PUSH

VOL/JOG

MENU

B

2 Press the [PUSH] Dial > to select [YEAR]/ [MONTH]/[DAY]/[HOUR]/[MINUTE] and turn to set it to a desired value.

CLOCK SET

YEAR 2002

MONTH OCT

DAY 08

HOUR 10AM

MINUTE 30

PUSH MENU TO RETURN

OYear will cycle in the order shown below.

2000, 2001, ..., 2089, 2000, ...

3 Press the [MENU] Button B to finish setting the date and time.

OThe clock operation starts from [00] second. OThe Menu will disappear when the [MENU]

Button is pressed again.

OIf the built-in battery is weak, the Date/Time Indication becomes [--]. In this case, charge the built-in battery.

OThe clock employs the 12-hour system.

The internal lithium battery sustains the operation of the clock. When the Date/Time Indication becomes [--], the internal lithium battery is exhausted.

--:--:-- --.--.----

1 Connect the AC Adaptor to the Camera Recorder with the power turned off and then connect to the AC Mains socket.

OAfter charging for 4 hours, the built-in lithium battery can power the clock for approximately 3 months.

LP Mode

A desired recording speed can be selected with [REC SPEED] on the [RECORDING SETUP] Sub-Menu.

If LP Mode is selected, the recording time becomes 1.5 times longer than that of SP Mode.

Although the image quality does not decrease with the LP Mode recording, mosaic-pattern noise may appear on a playback image, or some normal functions may be restricted.

OThe contents that are recorded in LP Mode are not completely compatible with other equipment.

OAudio dubbing is not possible with LP Mode. (-38-)

Audio Recording Mode

The sound quality of the recorded sound can be selected with [AUDIO REC] on the [RECORDING SETUP] Sub-Menu.

High sound-quality recording is possible with “16 bit 48 kHz 2 track” Mode. With the “12 bit 32 kHz 4 track” Mode, the original sound can be recorded on 2 tracks in stereo, while the other 2 tracks can be used for Audio Dubbing.

18