Panasonic AG-DVC7P $ Playback Zoom Function, $ Playback Digital Effect Functions, $ Audio Dubbing

Others

Notes and Hints

$ Playback Zoom Function

OYou cannot adjust the sound volume with the Remote Controller in Playback Zoom Mode.

OIf you turn off the Camera Recorder power or if you switch from VCR Mode to Camera Mode, Playback Zoom Mode is automatically cancelled.

OEven if Playback Zoom Functions are being used, images that are output from the DV Terminal (-8-) are not enlarged.

OAs you enlarge an image, the quality of image suffers.

ODuring a Playback Zoom, the Variable Speed Search Function cannot be changed with the Remote Controller.

$ Playback Digital Effect Functions

OSignals of images to which digital effects are added during playback cannot be output from the DV Terminal (-8-).

OYou cannot use the Wipe or Mix Function while playing back the non-recorded portion of tape.

$ Using the DV Cable for Recording (Digital Dubbing)

ORegardless of the setting, digital dubbing is carried out automatically in the same audio recording mode as that of the Cassette on the playback-side.

OThe images on the monitor of the recording side may be disturbed, but it does not affect the recorded images.

OEven if Playback Digital Effects or Playback Zoom have been used, these effects are not output from the DV Terminal.

OEven if you use device equipped with DV Terminals (such as IEEE1394), you may not be able to perform Digital Dubbing in some cases.

ODate or other information to be displayed cannot be displayed if the software of the connected equipment does not support the display function.

$ Playing Back on Your TV

OIf you set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu to [IN/OUT], nothing will be shown on the TV screen except during playback.

$ Audio Dubbing

OThe blank section of a tape cannot be dubbed. OSounds sent through the DV Terminal cannot be

dubbed.

OIf a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.

OIf you set the tape counter back to 0 at the position where you want to stop Audio Dubbing so as to make it possible to use the Memory Stop Function (-52-), Audio Dubbing is terminated automatically when the tape reaches this position.

OIn the case of importing data recorded with Audio Dubbing to a PC using the PC’s software program, only the original sound (ST1) may be imported, depending on the software program.

$ Recording the Contents of Other

Equipment

Analog-Digital Conversion

OWhen the Camera Recorder is connected with other digital video equipment through its DV Terminal, images recorded in analog form from other external equipment can be output to the digital video equipment through the DV Terminal.

OTo DV-output analog video signals sent from other equipment, set [DV OUT] on the [AV IN/OUT SETUP] Sub-Menu to [ON]. (Normally, keep the [DV OUT] set to [OFF]. If it is set to [ON], the quality of the image may be disturbed.)

45