Others
Cautions for Use
$ LCD Monitor/Viewfinder/Lens Hood
LCD Monitor
OIn a place with drastic temperature changes, condensation may form on the LCD Monitor. Wipe it with soft dry cloth.
OIf your Camera Recorder is extremely cold when you turn its power on, the image on the LCD Monitor is slightly darker than usual at first. However, as the internal temperature increases, it goes back to the normal brightness.
Extremely high precision technology is employed to produce the LCD Monitor screen featuring a total of approximately 112,000 pixels. The result is more than 99.99% effective pixels with a mere 0.01% of the pixels inactive or always lit. However, this is not a malfunction and does not affect the recorded picture.
Viewfinder
ODo not direct the Viewfinder or Lens to the sun. Internal components may be seriously damaged.
OTo clean the inside of the Viewfinder, remove the Eyecup 1, then keep pressing 2 and pull the cover 3 out.
1
3
2 
Extremely high precision technology is employed to produce the Viewfinder screen featuring a total of approximately 113,000 pixels. The result is more than 99.99% effective pixels with a mere 0.01% of the pixels inactive or always lit. However, this is not a malfunction and does not affect the recorded picture.
Lens Hood
ODo not attach other conversion lenses in front of the Lens Hood; there is no mount to be used for the attachment.
OWhen you wish to attach the Wide Conversion Lens
OWhen you attach the Lens Hood back, unite the marks and fasten the Lens Hood Attachment knob 1.
1
OIf you push the [W/T] Lever toward [W] during recording with the filter or conversion lens attached to the Camera Recorder, 4 corners of the image may become dark (vignetting). For details, please refer to the operating instructions of your accessories.
OBe sure to keep the Lens Hood attached to the Camera Recorder so as to shut out unnecessary light.
49
