![](/images/new-backgrounds/1131626/13162663x1.webp)
VCR Mode
Playing Back
The recorded scene can be played back immediately after the recording.
1 Set the [OFF/ON] Switch b to [ON].
CAMERA
VCR
OFF ON
b
2 Press the [MODE] Button _.
OThe [VCR] Lamp ` lights up.
_`
| CAMERA |
MODE | VCR |
|
$ Adjusting the Sound Volume
Until the [VOLUME] Indication appears, keep pressing the [PUSH] Dial >. Then, turn the [PUSH] Dial to adjust the volume. After the adjustment, press the [PUSH] Dial to make the [VOLUME] Indication disappear.
W.B/SHUTTER/IRIS
> PUSH
VOL/JOG
To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off a few seconds after the adjustment is finished.
3 Press the [6] Button D to rewind the tape.
DSEARCH
ORewind the tape to the point where you want to start playback.
OWhen the tape reaches the beginning, rewinding stops automatically.
4 Press the [1] Button F to start playback.
OThe [!] Indication appears.
OThe sound volume cannot be adjusted using the Remote Controller in Playback Zoom Function.
OIf a cassette recorded with a copyright protection signal is played back, the picture is distorted by
OFor other notes concerning this item, see
FBLC
!
To Stop Playback
Press the [$] Button E.
EFADE
32