Others

Menus related to [ADVANCED] and [SETUP]

Underlined items are the initial shipping condition.

ª[REC LAMP]

≥[OFF]≥[ON]

The recording lamp lights during recording and flashes when the unit receives a signal from the remote control or when the self-timer is counting down. When this is set to [OFF], it does not light during recording.

ª[DISPLAY]

≥[OFF]≥[ON]

The screen indications are selected as shown in the illustration below.

[OFF]

[ON]

HN

0h00m00s

30min

 

R30min

 

 

 

AUTO

 

 

15.12.2006

≥The display will change according to the presence or absence of an inserted SD card.

ª[POWER SAVE]

≥[OFF]

≥[5 MINUTES]

 

 

 

[OFF]:

The power saving function is not activated.

[5 MINUTES]:

When about 5 minutes have passed without any operation, this unit automatically turns off to prevent the battery from running down. When you use this unit, turn it on again.

≥In the following cases, the unit may not turn off even when you set this to [5 MINUTES].

When using the AC adaptor

When connecting the unit to a computer or printer via the USB cable

ª[BEEP SOUND]

≥[OFF]≥[ON]

This allows operations such as starting and ending recording to be signaled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended.

1 Beep

When you start recording When you turn on the power

When this unit is recognized by the computer or the printer etc.

2 Beeps

When you pause recording

When you turn off the power

2 Beeps/4 times

When an error occurs e.g. recording not starting. Check the sentence displayed on the screen. (l107)

ª[INITIAL SET]

≥[YES]≥[NO]

When there is a menu that cannot be selected due another function or mode being activated, set to [YES] for changing the menu settings back to the initial shipping condition.

104