Others

About recovery

When the SD card is accessed, you try to playback a scene or faulty control information is read, one of the messages below may be displayed. (Depending on the error, this may take time.)

CONTROL DATA ERROR HAS BEEN

DETECTED.

When connecting to AC adaptor or the remaining capacity of the battery is enough: [FINISHED.]

When the remaining capacity of the battery is low:

[PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.]

THUMBNAIL DATA ERROR IS

DETECTED.

When connecting to AC adaptor or the remaining capacity of the battery is enough:

[THUMBNAIL DATA HAS BEEN REPAIRED SUCCESSFULLY.]

When the remaining capacity of the battery is low:

[PLEASE CONNECT AC ADAPTOR OR CHANGE BATTERY.]

≥Use a sufficiently charged battery or the AC adaptor.

≥Depending on the condition of the data, it may not be possible to completely repair the data.

≥If the recovery fails, you will no longer be able to playback the scenes recorded before the power went off.

≥When data recorded on another device is recovered, it may not be possible to play back the data on this unit or the other device.

≥If the recovery fails, format the SD card on this unit.

≥If the thumbnail information is recovered, displaying the thumbnails may become slower.

109