Panasonic AG-HMX100E, AG-HMX100P manual 1:00 F

Operation Basic

To set the audio output format and the operation of audio faders

Set [SOURCE] to [CP PAIR], [BUS SEP1], [BUS SEP2], [12 PAIR], or [12 SEPA.] using the rotary 2 control. The following table shows the output method and audio input sources assigned to the faders for each setting.

Setting	Output Method		SOURCE 1/5 Fader	SOURCE 2/6 Fader	SOURCE 3/7 Fader	SOURCE 4/8 Fader
CP PAIR	Sound output of the		L and R channels of source	L and R channels of source	L and R channels of source	L and R channels of source
	selected input source		1 (or 5)	2 (or 6)	3 (or 7)	4 (or 8)
BUS SEP1			L channel of A/PROG	R channel of A/PROG	L channel of B/PRESET	R channel of B/PRESET
			source	source	source	source
BUS SEP2		When AB bus	L channel of A bus source	R channel of A bus source	L channel of B bus source	R channel of B bus source
		system is selected
		When Program/	Preview button lighted: L	Preview button lighted: R	Preview button lighted: L	Preview button lighted: R
		Preset system is	channel of PROG source	channel of PROG source	channel of PRESET source	channel of PRESET source
		selected	Preview button flashing: L	Preview button flashing: R	Preview button flashing: L	Preview button flashing: R
			channel of PRESET source	channel of PRESET source	channel of PROG source	channel of PROG source
12 PAIR	Fixed to sound of		L and R channel of source 1	L and R channel of source 2	Not available	Not available
	input sources 1 and 2.
12 SEPA.			L channel of source 1	R channel of source 1	L channel of source 2	R channel of source 2

To set the operation of AUX and MIC faders

Set [AUX/MIC] to [PAIR] or [SEPA.] (separate) using the rotary 3 control. The operation of each fader varies with the setting as described in the table shown below.

Setting	AUX fader	MIC fader
PAIR	L and R channels of	L and R channels of
	AUX input source	MIC input source
SEPA.	L channel of AUX (or	R channel of AUX (or
	MIC) input source*1	MIC) input source*1

*1 To adjust the audio level of the microphone, operate the fader while holding down the SHIFT key.

[INT VIDEO] Menu

(Internal Video Setting) Screen

When the INT VIDEO button is pressed, the [INT VIDEO] menu screen appears as shown below.

This menu is used to set the internal video signal built in this unit.

During color setting in the [INT VIDEO] menu, the joystick and rotary Z control are in the color setting mode.

The color set from this menu is indicated in the internal video display area.

WHT

YELW

CYAN

GREN

MGT

RED

BLUE

BLK

CST 1

CST 2

CL BR

ST # *1

MV # *1

WASH PB

128 PR

128

Y 196

EVENT

ME TIME

PATTERN

INT

00 E

1:00 F

3001

BLUE

INT VIDEO

GRADE POS 80

BACK

COLOR

LEVEL

PATTERN

GRADE

MATTE

WHITE

255

H1

0

COLOR

BAR

MEMORY

PAGE

FRAME

FRAME

MODE

1

2

WRITE

*1 # stands for a numeric value. (The maximum value varies with the memory size (the number of frames) set in the [MEMORY] submenu of the [SETUP] menu.)

28