The following figure shows an example connection of source equipment, PC, and this unit.
P2 mobile | ||
camera | ||
|
SDI (video and
audio) input
|
|
|
|
|
SDI IN 3 |
| SDI IN 4 | ||
|
|
|
|
|
HMX100
PC
To execute DSK
DSK is executed with the DSK execution button.
1 | Confirm that the DSK execution button is off. | |
|
|
|
2 | Select the video connector to which input | |
|
| video used for the key source to be inserted |
|
| and for the key fill fit in the key is output |
|
| ( page Vol.2‑11). |
|
|
|
3 | Press the DSK selector button. | |
|
| You can preview output video to which the DSK is |
|
| inserted. |
|
|
|
4 | Set the detection level of the key video | |
|
| by changing slice or slope setting |
|
| ( page Vol.2‑6). |
|
|
5 | Set the DSK transition time (from insertion start |
| to end) ( “To set the DSK transition time” on |
| this page). |
|
|
6 | Press the DSK execution button. |
The button is lighted, and flashes while the key is being inserted.
To use a transition pattern as DSK
Press the DSK EFFECTS button to turn on and select a transition pattern instead of selecting preset video ( page 35).
The dissolve effect is applied.
NOTE
It is impossible to use a pattern other than transition patterns for DSK.
If a pattern unavailable for DSK is selected, the DSK EFFECTS button flashes.
To set the DSK transition time
The currently set DSK transition time (DSK TIME) is shown in the area where the event number, transition time, pattern number, and internal video are displayed on the setting screen ( page 20).
The factory default setting is [02:00f] (2 seconds).
1 | Press the DSK setting button to turn on. |
|
|
2 | Set the DSK transition time by entering a |
| numeric value with the numeric keys or using |
| the TIME rotary control. |
| Example: To set “2:05” (2 seconds 5 frames), |
| enter “2.5.” |
| The [SYSTEM1] submenu of the [SETUP] menu can |
| be used to select the transition time display form |
| “seconds+frames” or “frames” ( page |
|
|
3 | Press the key. |
Operation Basic
37