Use the rotary 1 control to set the internal video output type to back matte video ([BACK MATTE]) or color bar output ([COLOR BAR]).
If [MEMORY] is selected, an external video input source can be saved in internal memory and used as internal video ( page 30).
Setting the Back Matte
[BACK MATTE]
To create back matte video as internal video, use the [BACK MATTE] submenu of the [INT VIDEO] menu.
Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5
BACK | COLOR | LEVEL | PATTERN | GRADE |
MATTE | WHITE | 255 | H1 | 0 |
|
|
|
|
|
| WHITE | LEVEL | OFF | |
| YELLOW | H1 |
| |
| CYAN |
| H2 |
|
| GREEN | SET | H3 |
|
| MAGENTA | BACK M | V1 |
|
| RED | WASH | V2 |
|
| BLUE |
| V3 |
|
| BLACK |
| DIAG1 |
|
| CUSTOM1 |
| DIAG2 |
|
| CUSTOM2 |
|
|
|
To set the back matte video color
|
|
|
|
|
1 |
| To check the back matte video color, press the | ||
|
|
| A/PROG INT (or B/PROG INT) button to set the | |
|
|
| currently displayed bus to the internal video. | |
|
|
|
|
|
2 |
| Use the rotary 2 control to set [COLOR] to one | ||
|
|
| of the colors shown in the table below. | |
|
|
|
|
|
|
|
| Setting | Color |
|
|
| [WHITE] (factory default | White |
|
|
| setting) |
|
|
|
| [YELLOW] | Yellow |
|
|
| [CYAN] | Cyan |
|
|
| [GREEN] | Green |
|
|
| [MAGENTA] | Magenta |
|
|
| [RED] | Red |
|
|
| [BLUE] | Blue |
|
|
| [BLACK] | Black |
|
|
| [CUSTOM1] or | Grey as the factory |
|
|
| [CUSTOM2] | default setting |
The PB, PR, and Y values are shown in the joystick and rotary Z control settings, and 3D display display area ( page 20).
4 If [CUSTOM1] or [CUSTOM2] is selected in Step 2, use the joystick and rotary Z control to set the [PB] and [PR] values in the range of 0 to 255 and the [Y] value in the range of 16 to 235 for selecting the back matte video color.
If other than [CUSTOM1] and [CUSTOM2] is selected, set the color level (the Y signal level for white) using the rotary 3 control.
To set the color gradation for back matte video
1 |
| To check the back matte video color, press the | ||
|
| A/PROG INT (or B/PROG INT) button to set the | ||
|
| currently displayed bus to the internal video. | ||
|
|
|
|
|
2 |
| Use the rotary 2 control to set [COLOR] to one | ||
|
| of the colors shown in the table below. | ||
|
|
|
|
|
|
| Setting |
| Color |
|
| [WHITE] (factory default | White | |
|
| setting) |
|
|
|
| [YELLOW] |
| Yellow |
|
| [CYAN] |
| Cyan |
|
| [GREEN] |
| Green |
|
| [MAGENTA] |
| Magenta |
|
| [RED] |
| Red |
|
| [BLUE] |
| Blue |
|
| [BLACK] |
| Black |
|
| [CUSTOM1] or |
| Grey as the factory |
|
| [CUSTOM2] |
| default setting |
|
| The PB, PR, and Y values are shown in the joystick | ||
|
| and rotary Z control, and 3D display settings display | ||
|
| area ( page 20). |
|
|
|
|
|
|
|
3 |
| Set [PATTERN] (gradation pattern) using the | ||
|
| rotary 4 control. |
|
|
|
|
|
| |
|
| Setting | Gradation pattern | |
|
| [OFF] | No gradation | |
|
| [H1] | Horizontal gradation 1 | |
|
| [H2] | Horizontal gradation 2 | |
|
| [H3] | Horizontal gradation 3 | |
|
| [V1] | Vertical gradation 1 | |
|
| [V2] | Vertical gradation 2 | |
|
| [V3] | Vertical gradation 3 | |
|
| [DIAG1] | Diagonal gradation 1 | |
|
| [DIAG2] | Diagonal gradation 2 | |
Operation Basic
|
|
| If [CUSTOM1] or [CUSTOM2] is selected |
3 | If [CUSTOM1] or [CUSTOM2] is selected in | 4 | |
| Step 2, set [SET] to [BACK M] (back matte) |
| in Step 2, set [SET] to [WASH] (wash color |
| using the rotary 3 control and set [PATTERN] to |
| meaning companion color for gradation) using |
| [OFF] using the rotary 4 control. |
| the rotary 3 control. |
29