Setup menu list (continued)
SCENE FILE screen (continued)
Item | Display | Description of settings | |
mode | |||
|
| ||
|
|
| |
V DETAIL FREQ | (Camera) | Sets the vertical detail for shooting in 480i progressive mode. | |
|
| THIN: Makes the detail thin. | |
|
| MID: Makes the detail slightly thicker. | |
|
| THICK: Makes the detail thicker. | |
|
| When images were shot in the progressive mode in which the vertical | |
|
| detail is set as “THIN” or “MID” and are played on a monitoring | |
|
| television (60i interlace), you will see flickers caused on horizontal | |
|
| lines and almost horizontal oblique lines. When playing back images | |
|
| in the progressive mode or when editing images or performing other | |
|
| postprocessing, images with a higher resolution will be obtained with | |
|
| the THIN or MID setting than with the THICK setting. | |
NAME EDIT | (Camera) | Edits the name of the selected scene file you have selected with the | |
|
| scene file dial. |
CAMERA SETUP screen
Item | Display | Description of settings | |
mode | |||
|
| ||
|
|
| |
ASPECT CONV | (Camera) | elects the aspect ratio of the image you record in 480i format. This item | |
|
| cannot be selected when the 1080i or 720P recording format is used. | |
|
| (Page 41) | |
|
| SIDE CROP: Crops the right and left edges of the image. | |
|
| LETTER BOX: Adds black bands at the top and bottom of the image. | |
|
| SQUEEZE: Squeezes the image horizontally. | |
SETUP | (Camera) | Switch the setup level of video signals in 480i format using a P2 card. | |
|
| 0%: | |
|
| Setup is switched to 0% for both the camera output and the recording. | |
|
| 7.5%A: | |
|
| Setup is switched to 7.5% for the camera output and 0% for the | |
|
| recording. |
100 | ___indicates the factory setting. |
