Setup menu list (continued)
CARD FUNCTIONS screen (continued)
Item | Display | Description of settings | ||
mode | ||||
|
|
| ||
|
|
|
| |
SD CARD FORMAT | (Camera) | Formats the SD memory cards. |
| |
OTHER FUNCTIONS screen
Item | Display | Description of settings | |
mode | |||
|
| ||
|
|
| |
USER FILE | (Camera) | LOAD: | |
| (MCR) | Loads the settings in a previously stored user file. | |
|
| SAVE: | |
|
| Saves the updated user file settings. | |
|
| INITIAL: | |
|
| Returns the user settings in the user file to the factory settings. | |
|
| After a LOAD or INITIAL operation, turn the POWER switch off and | |
|
| then back on again to make the new settings available. | |
|
| • An INITIAL operation does not change the TIME ZONE settings | |
|
| (Page 111). | |
REMOTE | (Camera) | Sets the operations of the supplied remote control unit. (Remote control | |
| (MCR) | setup. (Page 18)) | |
|
| OFF: | |
|
| Operations are not accepted from any remote control. | |
|
| 1: | |
|
| Accepts commands from the remote control set for “operation mode 1”. | |
|
| 2: | |
|
| Accepts commands from the remote control set for “operation mode 2”. | |
1394 CONTROL | (Camera) | Sets the control method for backup recording using a backup unit | |
|
| connected to the 1394 terminal. | |
|
| OFF: | |
|
| The backup unit is not controlled. | |
|
| EXT: | |
|
| The backup unit can be controlled by the START/STOP button. The | |
|
| images shot by the camera recorder are recorded by the backup unit. | |
|
| Note that the camera recorder does not record them. | |
|
| BOTH: | |
|
| The images shot by the camera recorder are recorded by both the | |
|
| camera recorder and backup unit. | |
|
| CHAIN: | |
|
| When the camera recorder’s media approaches its end during | |
|
| shooting, the backup unit in the recording | |
|
| starts recording images. | |
1394 CMD SEL | (Camera) | Sets how the START/STOP button works for the backup unit. | |
|
| REC_P: | |
|
| This switches between recording and pause. | |
|
| STOP: | |
|
| This switches between recording and stop. | |
|
| <Note> | |
|
| If the backup unit does not have a rec pause function, select STOP. | |
PC MODE | (Camera) | Selects the terminal for data transfer. (You cannot select USB and 1394 | |
| (MCR) | at the same time.) | |
|
| USB DEVICE: | |
|
| Mode for sending files using the USB connector. | |
|
| 1394 DEVICE: | |
|
| Mode for sending files using the 1394 connector. | |
|
| 1394 HOST: | |
|
| Mode for copying files from the P2 card onto an external hard disk drive | |
|
| using the 1394 connector. |
110 | ___indicates the factory setting. |
