Panasonic AG-HVX200AP 110, Playback Functions screen, Mix, Audio OUT P2 MCR, Audio OUT Tape

Setup menu list (continued)

PLAYBACK FUNCTIONS screen

	Item	Display	Description of settings
		mode
32K(12bit) AUDIO		(VCR)	Sets the audio to output as CH1 and CH2 signals when playing back a tape
TAPE			recorded in the 32K (12bit) audio mode.
			ST1:
			Selects the sound that was recorded during shooting.
			CH1 signals = CH1 track
			CH2 signals = CH2 track
			ST2:
			Selects the sound that was dubbed on the recording.
			CH1 signals = CH3 track
			CH2 signals = CH4 track
			MIX:
			Mixes the sound that was recorded in shooting and audio dubbing.
			CH1 signals = CH1 track + CH3 track
			CH2 signals = CH2 track + CH4 track
			<Note>
			When the sound is recorded in the 48K (16bit) audio mode, CH3 and CH4 do
			not exist so the following is always the case.
			CH1 signals = CH1 track
			CH2 signals = CH2 track
AUDIO OUT (P2)		(MCR/	Sets the audio signals to output from the AUDIO IN/OUT pin jack when the P2
P2		VCR)	card or the tape is played back.
			CH1 · CH2:
AUDIO OUT (TAPE)			CH1 output = CH1 signals, CH2 output = CH2 signals
TAPE			CH1:
			CH1 output = CH1 signals, CH2 output = CH1 signals
			CH2:
			CH1 output = CH2 signals, CH2 output = CH2 signals
			CH3 · CH4: (P2 card only)
			CH1 output = CH3 signals, CH2 output = CH4 signals
			CH3: (P2 card only)
			CH1 output = CH3 signals, CH2 output = CH3 signals
			CH4: (P2 card only)
			CH1 output = CH4 signals, CH2 output = CH4 signals
				indicates the factory setting.

110