Panasonic AG-HVX200AP operating instructions Insert the battery, Remote control setup, Setting

The remote control

Insert the battery

1 Push the catch in the direction shown by arrow to remove the holder.

2 Insert the battery with the “+” marked side facing up.

Remote control setup

When using two camera-recorders simultaneously, set this camera-recorder and the remote control to either [VCR1] or [VCR2] so the remote control does not operate the wrong camera-recorder by mistake.

Setting

• Wireless remote control
Press the STOP (	) and STILL ADV (		) buttons
at the same time to set the remote control unit for
				Preparation
control unit for use with VCR2.
use with VCR1.
Alternatively, press the STOP (		) and STILL ADV
( ) buttons at the same time to set the remote
When the battery in the remote control unit is
replaced, the remote control unit is set for use
with VCR1.

3 Return the holder to its original position.

•When the battery (CR2025) has run out, replace it with a new one. (The battery lasts about one year, depending on the frequency of use.)

If the remote control unit fails to work even when it is operated near the camera-recorder’s remote control sensor, the battery has run out.

•Keep the battery out of the reach of children.

•Camera

In the setup menus, OTHER FUNCTIONS screen, REMOTE, set to VCR1 or VCR2. (Page 115)

If different settings are used for the camera- recorder and remote control unit, “REMOTE” lights in red on the viewfinder and LCD monitor.

		DATE/	PHOTO	START/
	OSD			STOP
		TIME	SHOT
	COUNTER RESET		TITLE	ZOOM
	MULTI/	REC	A.DUB
	P-IN-P			+
				- VOL
	/REW	PLAY	FF/
	STILL ADV	PAUSE	STILL ADV
VCR2	INDEX	STOP	INDEX	VCR1
	SELECT	VAR.		PB.
		SEARCH		ZOOM

STORE

	MENU
OFF/ON	SET
P.B.DIGITAL	ITEM

19