Panasonic AG-HVX200AP operating instructions 118

Setup menu list (continued)

OTHER FUNCTIONS screen (continued)

	Item	Display	Description of settings
		mode
POWER SAVE		(Camera)	Selects the power-saving mode when the top panel operation keys, DISP/
P2	TAPE		MODE CHK button, USER1-3 buttons and EVF DTL button have not been
			operated for 5 minutes or so.
			ON:
			The camera-recorder’s power is set to OFF.
			OFF:
			The cylinder head remains stopped without turning off the camera-recorder’s
			power.
			• When connection is made with an external device using the IEEE1394 cable
			and the communication mode is established in this way, the power will not be
			set off even when none of the above buttons has been operated.
			• The power will not be turned off when a P2 card or tape has not been
			installed in the P2 mode or TAPE mode, respectively, even if ON has been
			selected as this item’s setting.
USER FILE		(Camera)	LOAD:
P2	TAPE	(MCR/	The previous user file settings are loaded.
		VCR)	SAVE:
			The changed user file settings are saved.
			INITIAL:
			The user file settings are returned to the factory settings.
			After performing LOAD or INITIAL, turn the POWER switch OFF and then
			back ON to activate the settings.
			• The setting for the TIME ZONE option (page 117) remains unchanged even
			when INITIAL is performed.
HOUR METER		(Camera)	Displays the total running time (a 5-digit figure per hour) of the cylinder head.
TAPE		(VCR)
OPERATION		(Camera)	Displays the power-on time (a 5-digit figure).
P2		(MCR)

indicates the factory setting.

118