![](/images/backgrounds/211755/bg11.png)
Preparation
17
Installing and removing the power supplyInstallation
Insert the battery until it clicks into place.
Removal
1 Set the POWER switch to OFF, and check
that the mode lamp is off.
2 Remove the battery while pressing the
battery release button.
• Support the battery with your hand to ensure
that it will not fall.
Installation
1 Connect the DC cord to the AC adapter.
2 Plug the AC power supply cord into the
power outlet.
3 Insert the DC cord’s battery connector until
it clicks into place.
Removal
1 Set the POWER switch to OFF, and check
that the mode lamp is off.
2 Remove the DC cord’s battery connector
while pressing the battery release button.
3 Disconnect the AC power supply cord from
the power outlet.
• You cannot charge the battery when supplying
power to the camera-recorder from the AC
adapter.
CAUTION:
• This unit can be operated at a voltage in the
range of 100-240V AC. An AC plug adapter may
be required for voltages other than 120 V AC. If
a conversion plug is required, consult with your
dealer as to which one is to be purchased.
• Disconnect the AC power supply cord from the
power outlet when the unit is not going to be
used.
DC cord’s battery
connector
Battery release
button
Mode lamp