Panasonic AJ-HD3700B manual Home Audio TC/CHR

Recording

14. Insert a recording-enabled cassette.

It should be borne in mind that the 4-channel or 8-channel audio version will be identified in ac- cordance with the position selected for the cassette C bit pin, as mentioned on page 25.

Note that when the cassette tape is inserted, it is not possible to change the system frequency which was set using the F1 (FREQ) key on the SYSTEM SET UP menu of the previous page.

15. Press the F13 (REC INH) key on the HOME menu to set to “FREE”.

REC INH

FREE

16. Perform input signal setting with the F1 to F6 (CH1 to CH4) keys on the AUDIO IN PCM INPUT SELECT menu. [In the case of the 1080/23.98, 1080/24p, 1080/25p, 1080/50i and 576/50i formats or 1080/59.94i (8-channel audio version), 720/59.94i (8-channel audio version) and 480/59.94i (8-channel audio version) formats, perform input signal setting with the F7 to F13 (CH5 to CH8).] Select DIGITAL (AES/SERIAL.), INT SG or ANALOG.

F13

F12

F11

F10

F9

F1 F2 F3 F4 F5 F6 F7 F8

	CH1/2-INPUT
CH-1		CH-2	DIGITAL
DIGITAL		DIGITAL	AES

	CH3/4-INPUT
CH-3
		CH-4	DIGITAL
INT-SG		ANALOG	SERIAL

17. When the input audio signal is to be mixed with the analog cue channel for recording, press the F9 (CUE) key on the AUDIO IN CUE INPUT menu to set it to “D-MIX” and select the mixing channel with the F1 to F4 (CUE MIX CH1 to CUE MIX CH4) keys. (In the case of the 1080/23.98, 1080/24p, 1080/25p, 1080/50i and 576/50i formats or 1080/59.94i (8-channel audio version), 720/59.94i (8-chan- nel audio version) and 480/59.94i (8-channel audio version) formats, select CH1 to CH4 and CH5 to CH8 with the F1 to 4 and the F10 to F13 keys.)

CUE

D-MIX

18. Adjust the audio input level on the AUDIO IN menu.

19. When the time code is to be recorded, perform the time code-related settings on the TC/CHR menu.

F13

F12

F11

F10

F9

F1 F2 F3 F4 F5 F6 F7 F8

10.To enter the time code default value as desired, press the cursor center key at the HOME menu and set the value.

11.When the preparation for the signals to be recorded has been established, press the REC/EDIT button and the PLAY button together.

Recording will start.

12.To stop recording at any time, press the STOP button.

How to display the ≥HOME menu:		≥AUDIO IN PCM menu:			≥AUDIO IN CUE menu:			≥TC/CHR menu:
menus:				# F6			# F7
	HOME		AUDIO IN			AUDIO IN			TC/CHR

– 26 –