Basic operations
∑Tape speed override (TSO) function
This is a function for finely adjusting the normal playback speed in the range of n15%.
PLAY
∑Cue
(1)Press the PLAY button. Normal playback starts.
(2)Turn the search dial while pressing the PLAY button, or press the i or j keys. When using the search dial, the tape speed changes depending on the angle to which the search dial is turned. When using the i or j keys, the tape speed changes according to how long the key is pressed continously. The speed is displayed in numeric values on the search indi- cator.
(3)To return to normal playback, release the PLAY button.
This function sets any point on the tape for preroll and search operations.
When TC INPUT is set to the STANDARD mode*
(1) Press the cursor center key to display the cursor. The time code value will be highlighted.
Cursor center key
LTCR
00 : 00 : 00 : 00
Cursor key | Cursor |
|
(2)Move the cursor with the cursor key (4) to the CUE TIME display section. The cue display section will be highlighted.
CUE TIME
H M S F
Cursor
(3)Press the cursor center key again to change it to a bar cursor. Enter the cue point with the number keys.
0 | 0 | 4 | 4 | ≥Cue points also can be entered by pressing the ENTRY button. | |
In this case, the time data of the current tape position will be | |||||
|
|
|
| ||
0 | 7 | 0 | 4 | entered. |
ENTRY
CUE TIME
00 H 44 M 07 S 04 F
(4)Press the ENT key.
The cursor will disappear.
(5)Press the PREROLL button.
≥When the PREROLL button is pressed,
PREROLL
start, and the tape will stop at the preroll point (the point pre- ceding the cue point by the preroll time).
≥To stop at the cue point, either set the preroll time to “0” or press the F key and PREROLL button together. (This results in the
*The STANDARD mode is set using the F9 key on the PANEL SET UP menu. (This key can be set in either the STANDARD or REVERSE mode.)
– 32 –
