Matrix Table OFF, A, B, Bar Sel | Panasonic AK-HC1500G specs

Setting of menu items

SETTING menu

[1]MODE

��MODE(1/2) ��
D5600K	:OFF
GAIN SELECT	:LOW
CAM ID	:BAR
CAM ID POSI	:1
MATRIX TABLE	:OFF
COLOR CORRECTION	:OFF
DIGITAL EXTENDER	:OFF
BAR SEL	:FULL(16:9)
FORMAT	:1080/59.94i

NOTE

When DIGITAL EXTENDER is set to ON, the resolution is downgraded. The detail function ceases to work as well.

CAM ID POSI [0 to 3]

For selecting where the camera ID is to be displayed.

0:top left, 1: top right, 2: bottom left,

3:bottom right

AK-HC1500AK-HC1500

01

23

AK-HC1500AK-HC1500

MATRIX TABLE [OFF, A, B]

For selecting OFF, A or B as the matrix setting.

COLOR CORRECTION [OFF, ON]

For turning the color correction function ON or OFF.

DIGITAL EXTENDER [OFF, ON]

For digitally doubling the images when set to ON.

BAR SEL

[FULL (16:9), FULL (4:3), SMPTE (16:9), SMPTE (4:3), ARIB]

For selecting the color bars.

Select the 4:3 color bars for down-conversion at the system side. The color bars and characters will then be contained within the 4:3 picture angle.

- 37 (E) -

Image 38

Panasonic AK-HC1500G Matrix Table OFF, A, B, Color Correction OFF, on, Digital Extender OFF, on, Bar Sel

Contents

AK-HC1500G Multi Purpose Camera English Version FCC Note English Important Safety Instructions For business users in the European Union Contents Accessories Characteristics Introduction Precautions for use  Cooling fan Front view Bottom view Rear view Major operating controls and their functions  HD SDI output connector HD SDI OUT  Tally output connector Tally OUT How to set the lens Iris control cable to Iris connector How to set up the system Configuration example 1 Connection of camera controller Configuration example 2 High-Speed P/T system Adjust the black balance Operation procedureAdjust the white balance Start shooting Lens iris gain volume adjustment How to adjustFlange back adjustment for zoom lens Auto iris power zoom lens White balance adjustment Color temperature and white balance adjustment reference Black balance adjustment Gen-lock adjustment  Using AK-HRP150G camera controller Setting of menu itemsHow to display the menus TOP menu Detection READY, Active  Maintenance menuBlack Shading Correctdig OFF, on PEDESTAL, Gamma Gamma DRS OFF, on Gamma OFF, onBlack Gamma OFF, on Cine Gamma Select Video REC, Film REC Flare OFF, on FlareFlare 000 to 80.00% to 107.00% Video Menu 30% to 90% Film MENU/VIDEO REC KNEE, White ClipKnee Point Knee Point -25.00% to +25.00% White Clip LVL 90% to 109% Knee Point 80.00% to 107.00%Knee Level 100% to 109% White Clip OFF, on B GainKnee OFF, MANUAL, Auto High Color OFF, on Knee Aperture OFF, on DetailDetail OFF, on Slim Detail OFF, on Detail Source Skin GET OFF, on Skin Tone DetailSkin Tone DTL OFF, on Iris Level 0 to Iris Mode LENS, CAMGAIN, Auto Iris Iris PEAK/AVE 0 to Mode S.GAIN1, S.GAIN2, S.GAIN3 Super Gain PED Offset -200 to +200 Peak Frequency 0 to35 to 0.75 DRS OFF -10 to +10 DRS on Frame Rate 60 to Frame ModeFrame Rate Range 60-6 Matrix Matrix Table A, B Color Correction Gain Select  Setting menuMode LOW, MID, HIGH, S.GAIN1 to Digital Extender OFF, on Matrix Table OFF, A, BColor Correction OFF, on BAR SEL AWB Active FormatStatus OFF, on AWB OK Menu on BAR OFF, on ABB OKOUT Range RGB FAN OFF, AUTO, on Synchro Scan ShutterShutter Speed GEN-LOCK Input BNC, Dsub GEN-LOCKPIX Defect Auto Detection Protocol Protocol 1 to  Camera ID menu LOAD/STORE from Mode LOAD/STORE File Operation menu Execute  Time Code menu ResetPreset Menu list 47 E 48 E Appearance Unit inch mm Specifications Input/output signal Appendix Control cable for information camera