Panasonic AK-HRP200G Introduction, „„Overview, „„Memory Cards, „„Upgrade software, „„Disclaimer of warranty, „„File types handled by the unit, „„Software for peripheral equipment

Introduction

„„Overview

This unit is a remote operation panel for controlling a studio handy camera (AK-HC3800) and a camera controller unit like the AK‑HCU200.

Use a dedicated optical fiber cable to connect a studio handy camera to a camera controller unit and use a dedicated ROP cable (optional accessory) to connect this unit to the camera controller unit.

„„Memory Cards

Memory cards used with the unit should conform to SD or SDHC standards.

Be sure to use the unit to format memory cards.

Memory cards with the following capacity can be used with the unit. SDXC memory cards are not supported.

SD memory cards: 8 MB to 2 GB

SDHC memory cards: 4 GB to 32 GB

For the latest information not described in the Operating Instructions, refer to the following website.

http://pro-av.panasonic.net/

Observe the following points when using and storing this unit.

• Avoid high temperature and humidity.

• Avoid water droplets.

• Avoid static electricity.

„„Upgrade software

You can obtain upgrade software from Service and Support on the following website.

http://pro-av.panasonic.net/

For the upgrade procedure, refer to the instructions included with the download file.

„„Software for peripheral equipment

Software upgrades will also become necessary for the peripheral equipment that is connected to this unit (cameras or CCUs).

For details, consult your supplier.

„„Disclaimer of warranty

IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:

(1)ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;

(2)PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE USER;

(3)UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER;

(4)INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;

(5)ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;

(6)LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE;

„„File types handled by the unit

Scene file	Scene files are mainly used by video
	engineers (VE) to create the required image
	characteristics.
Reference file	The term reference file is a generic term for
	user files and factory files.
User file	A user file is system setting data (reference
	file) composed of scene files and operation
	data. The user can record user files.
Factory file	A file that contains camera settings that were
	stored at the factory.
Lens file	Data for correcting specific lens
	characteristics that are used by video
	engineers (VE).
ROP configuration file	ROP specific setting data.

3