Panasonic AK-HRP200G 4 Save lens file to/load lens file from memory card, 4-1Save lens file to memory card, 4-2Load lens file from memory card, selection, selection, [CC] (load)

Setup Mode Operations  (continued)

4 Save lens file to/load lens file from memory card

Press <SELECT>to select menu number [4].

Select file number,
Select y (Select)/	Save file indication
n (Cancel)	Load file indication
UP	ND	CC	SHT	SYNC		CAMERA
	M.GAIN		M.PED			10-19
DATA
SET
			IRIS			No.
DOWN	DISPLAY SELECT					SELECT
SET UP	ND/CC	M.GAIN/M.PED SHUTTER
SHIFT
+	SAVE/LOAD		EXIT	EXECUTE
UP+DOWN
Press to save/load			Press to confirm
Press to exit setup mode					Press to select the
(hold down)					menu number

4-1 Save lens file to memory card

1.Press <SAVE/LOAD> to select [ND].

• Each press of <SAVE/LOAD> toggles between [ND] (Save) and

[CC] (load).

ND CC SHT SYNC

M.GAIN M.PED

IRIS

2.Press <UP> or <DOWN> to select a file number on the memory card and press <EXECUTE> to confirm the

selection.

ND CC SHT SYNC

M.GAIN M.PED

IRIS

To save a file to file no. 2 on the memory card

3.Press <UP> or <DOWN> to select [y] and press <EXECUTE> to confirm the selection.

• Do not remove a memory card that is being accessed.

ND CC SHT SYNC

M.GAIN M.PED

IRIS

•To cancel saving, select [n] and press <EXECUTE>.

•The file is saved to the memory card and [Fin] appears when saving ends.

•[E02] is displayed if the save operation to the memory card fails. (→page 13)

If this happens, check the memory card and try again or insert another memory card to perform the operation again.

•[E01] is displayed when a lens file with the same name as the one you are attempting to save already exists on the memory card. To overwrite the file, press <UP> or <DOWN> to select [y] and press <EXECUTE>.(→page 13)

•[E04] is displayed when the lens file is off.

•To exit setup mode, hold down <EXIT> for about 2 seconds.

•To make other settings, press <SELECT> to select a menu number.

4-2 Load lens file from memory card

1.Press <SAVE/LOAD> to select [CC].

• Each press of <SAVE/LOAD> toggles it between [ND] (Save) and[CC] (Load).

ND CC SHT SYNC

M.GAIN M.PED

IRIS

2.Press <UP> or <DOWN> to select a file number on the memory card and press <EXECUTE> to confirm the

selection.

ND CC SHT SYNC

M.GAIN M.PED

IRIS

To load file no. 2 from the memory card

3.Press <UP> or <DOWN> to select [y] and press <EXECUTE> to confirm the selection.

• Do not remove a memory card that is being accessed.

ND CC SHT SYNC

M.GAIN M.PED

IRIS

•To cancel loading, select [n] and press <EXECUTE>.

•The file is loaded from the memory card and [Fin] appears when loading ends.

•[E02] is displayed if the load operation from the memory card fails. (→page 13)

If this happens, check the memory card and see whether the file exists on the memory card. If it does, start over from step 1.

•[E04] is displayed when the lens file is off.

•To exit setup mode, hold down <EXIT> for about 2 seconds.

•To make other settings, press <SELECT> to select a menu number.

5 Save ROP configuration file to/load ROP configuration file from memory card

Press <SELECT>to select menu number [5].

Select y (Select)/	Save file indication
n (Cancel)	Load file indication
UP	ND	CC	SHT	SYNC		CAMERA
	M.GAIN		M.PED			10-19
DATA
SET
			IRIS			No.
DOWN	DISPLAY SELECT					SELECT
SET UP	ND/CC	M.GAIN/M.PED SHUTTER
SHIFT
+	SAVE/LOAD		EXIT	EXECUTE
UP+DOWN
Press to save/load			Press to confirm
Press to exit setup mode					Press to select the
(hold down)					menu number

9