Setup Mode Operations
1.Set camera number
1.Open setup mode and check that menu number [1] is displayed. If a menu number other than [1] appears, press <SELECT> to select menu number [1].
Press to select the camera number
UP | ND | CC | SHT | SYNC | CAMERA | |
| M.GAIN | M.PED | ||||
DATA |
|
|
|
|
| |
SET |
|
|
|
|
| |
|
|
| IRIS |
| No. | |
|
|
|
|
| ||
DOWN | DISPLAY SELECT | SELECT | ||||
SET UP | ND/CC | M.GAIN/M.PED SHUTTER | ||||
| ||||||
SHIFT |
|
|
|
|
| |
+ | SAVE/LOAD |
| EXIT | EXECUTE |
| |
UP+DOWN |
|
| ||||
Press to exit setup mode |
| Press to select the | ||||
(hold down) |
|
|
| menu number | ||
Press to confirm the camera number
2.Press <UP> or <DOWN> to select a camera number andpress <EXECUTE> to confirm the selection.ND CC SHT SYNC
M.GAIN M.PED
IRIS
To select camera number 2
•Camera numbers become available after exiting setup mode.•To exit setup mode, hold down <EXIT> for about 2 seconds.•To make other settings, press <SELECT> to select a menu number.2.Save scene file to/load scene file from memory card
Current operating status data is saved as a scene file to the memory card.Press <SELECT>to select menu number [2].Select file number, | Save file indication |
|
| ||||
Select y (Select)/ |
|
| |||||
n (Cancel) | Load file indication |
| |||||
UP | ND | CC | SHT | SYNC |
| CAMERA | |
| M.GAIN | M.PED |
| ||||
DATA |
|
|
|
|
|
| |
SET |
|
|
|
|
|
| |
|
|
| IRIS |
|
| No. | |
|
|
|
|
|
| ||
DOWN | DISPLAY SELECT |
| SELECT | ||||
SET UP | ND/CC | M.GAIN/M.PED SHUTTER | |||||
| |||||||
SHIFT |
|
|
|
|
|
| |
+ | SAVE/LOAD |
| EXIT | EXECUTE |
| ||
UP+DOWN |
|
| |||||
Press to save/load | Press to confirm | ||||||
Press to exit setup mode | Press to select the | ||||||
(hold down) |
|
|
| menu number | |||
2-1 Save scene file to memory card
1.Press <SAVE/LOAD> to select [ND].• Each press of <SAVE/LOAD> toggles between [ND] (Save) and[CC] (load).ND CC SHT SYNC
M.GAIN M.PED
IRIS
2.Press <UP> or <DOWN> to select a file number on the memory card and press <EXECUTE> to confirm the
selection.ND CC SHT SYNC
M.GAIN M.PED
IRIS
To save a file to file no. 2 on the memory card
3.Press <UP> or <DOWN> to select [y] and press <EXECUTE> to confirm the selection.
• Do not remove a memory card that is being accessed.ND CC SHT SYNC
M.GAIN M.PED
IRIS
•To cancel saving, select [n] and press <EXECUTE>.•The file is saved to the memory card and [Fin] appears when saving ends.•[E02] is displayed if the save operation to the memory card fails. (→page 13)If this happens, check the memory card and try again or insert another memory card to perform the operation again.
•[E01] is displayed when a scene file with the same name as the one you are attempting to save already exists on the memory card.
To overwrite the file, press <UP> or <DOWN> to select [y] and press <EXECUTE>.(→page 13)
•To exit setup mode, hold down <EXIT> for about 2 seconds.
•To make other settings, press <SELECT> to select a menu number.
2-2 Load scene file from memory card
Scene file data loaded from the memory card is returned to the operating status. (It is not returned to scene files 1 to 4. To return the data to scene files 1 to 4, exit setup mode and store the data in one of scene files 1 to 4. For details, refer to <Basics>, the instruction manual.)
1.Press <SAVE/LOAD> to select [CC].• Each press of <SAVE/LOAD> toggles between [ND] (Save) and
[CC] (load).
ND CC SHT SYNC
M.GAIN M.PED
IRIS
2.Press <UP> or <DOWN> to select a file number on the memory card and press <EXECUTE> to confirm the
selection.
ND CC SHT SYNC
M.GAIN M.PED
IRIS
To load file no. 2 from the memory card
3.Press <UP> or <DOWN> to select [y] and press <EXECUTE> to confirm the selection.
• Do not remove a memory card that is being accessed.
ND CC SHT SYNC
M.GAIN M.PED
IRIS
7