•Total Pedestal Adjustment
Total pedestal adjustment is made to adjust the pedestals of two or more cameras. Using an oscillo- scope or a waveform monitor, adjust the pedestals to 5 IRE (0.035 V) or 7.5 IRE (0.050 V) with T.PED Control of the multi hybrid control panel.
T. PED Control
T. P E D |
| C A B L E C O M P |
YC
5 IRE (0.035V) or
7.5 IRE (0.050V)
3)Set the switches for gain, shutter, etc. as appropriate to the conditions of using the camera.
4)Set the camera control switch on the multi hybrid con- trol panel to the OFF position.
5)Repeat Steps 1 to 4 to finish cable compensation, G/L adjustment, total pedestal adjustment, and switch set- ting for all the cameras.
4.White Balance and Black Balance Setting
1)Select a camera with the CONTROL switch on the multi hybrid control panel.
2)Select a camera with the CONTROL switch on the multi hybrid control panel.
•White balance adjustment is necessary when using the camera for the first time, or if the camera has not been used for a long period of time.
•Once the white balance is adjusted, no readjustment is necessary if the camera is used under the same condi- tions.
•Automatic White Balance Control (AWC)
The color temperature conditions for two channels A and B can be stored in the memory in advance. Once the white balance is adjusted, all that is needed is to select either AUTO/ATW A Switch or AUTO/ATW B
Switch of the multi hybrid control panel. if the camera is used under the same conditions. No readjustment is necessary. If the white balance is readjusted, the exist- ing white balance data is replaced with new data.
qPress either AUTO/ATW A Switch or AUTO/ATW B switch of the multi hybrid control panel.
