Panasonic AW-HB505 manual o Camera Control Input Connector TO CONTROL PANEL, CAMERA CONTROL IN

oCamera Control Input Connector [TO CONTROL PANEL, CAMERA CONTROL IN]

Connect it to Camera Control Input Connector [CAM- ERA CONTROL OUT] on the multi hybrid control panel with a coaxial straight cable (5C-2V or equivalent), which may be extended up to 10 meters.

!0Pan/tilt Control Output Connector [TO CAMERA

PAN/TILT HEAD, PAN/TILT CONTOROL OUT] (RJ- 45 8-pin Modular Jack)

Connect one of [1] to [5] Pan/tilt Control Output Connectors to Pan/tilt Control Input Connector [P/T CONTROL IN] on the corresponding camera and pan/tilt head with a 10BASE-T straight cable (UTP cat- egory 5 or equivalent). The maximum allowable cable length is 500 meters.

!1Video Input Connector [TO CAMERA PAN/TILT

HEAD, VIDEO IN] (BNC Connector)

Connect one of [1] to [5] Video Input Connectors to Video Output Connector Connector [VIDEO OUT] on the corresponding camera and pan/tilt head with a coaxial cable (5C-2V or equivalent). The maximum allowable cable length is 500 meters.

!2Genlock Output Connector [TO CAMERA PAN/TILT

HEAD, G/L OUT] (BNC Connector)

Connect one of [1] to [5] HEAD G/L OUT Connectors to Genlock Signal Input Connector [G/L IN] on the cor- responding camera and pan/tilt head with a coaxial

cable (5C-2V or equivalent). The maximum allowable cable length is 500 meters.

!3Camera Control Output Connector [TO CAMERA

PAN/TILT HEAD, CAMERA CONTROL OUT]

Connect one of [1] to [5] Camera Control Output Connectors to Camera Control Signal Input Connector [CAMERA CONTROL IN] on the corresponding cam- era and pan/tilt head with a coaxial cable (5C-2V or equivalent). The maximum allowable cable length is 500 meters.

!4S-Video Output Connector [S-VIDEO OUT] (4-pin S-

Connector)

The luminance (Y) and chrominance (C) signals of the corresponding camera are output from one of [1] to [5] S-Video Output Connectors. Connect it to a monitor or an S-VHS VCR for V-video input.

!5Video Output Connector [VIDEO OUT] (BNC Connector)

The video signals of the corresponding camera adjust- ed by the cable compensation circuit and CABLE COMP Y and C Controls e and r in the correspond- ing pan/tilt head are output from one of [1] to [5] Video Output Connectors. Connect a monitor, special effect generator (SEG), or VCR, for example, to it with a coaxial cable for video input.

-7-