■Option Card Setting Submenu
|
|
|
|
|
| |||
**Opation Card Set** |
| **Opation Card Set** |
| |||||
| Zebra Indicator | ON | Zebra Indicator | ON | ||||
| ||||||||
|
|
| Zebra 1 | Level | 70% | Zebra 1 | Level | 70% |
|
| |||||||
|
|
| Zebra 2 | Level | 85% | Zebra 2 | Level | 85% |
|
|
| ||||||
| Safety Zone | I | Safety Zone | I | ||||
| ||||||||
| EVF Output | Y | EVF Output | Y | ||||
| ||||||||
| Component | R/G/B |
|
|
| |||
|
|
|
| |||||
Return |
|
| Return |
|
| |||
qZebra Indicator [Zebra Indicator: OFF/ON]
ON: Zebra indicator is shown in the viewfinder.
OFF: Zebra indicator is not shown in the viewfinder.
Note: If [CVBS] is selected at Item [EVF Output: Y/CVBS] r, the zebra indicator will not be shown.
wZebra 1 Level Set [Zebra 1 Level: 70% to 109%]
Zebra 2 Level Set [Zebra 2 Level: 71% to 110%] Zebra level 1 or 2 can be only when Zebra Indicator q is at ON.
The zebra indicator can be shown in two steps using two zebra patterns.
2 Level shows a finer zebra pattern than 1 level.
2 Level must be set at least 1% higher than 2 level.
eSafety Zone Select [Safety Zone: 1 to 5/OFF]
A type of safety zone to be shown in the viewfinder can be selected.
No safety zone is shown if OFF is selected.
