Panasonic AW-PB506AL manual Installing the SDI card, Before installing the SDI card

Align the SDI card with the guides and insert it.

Ensure the card is fully inserted.

Installing the SDI card

Always ask your local dealer to install the SDI card.

Before installing the SDI card:

Release the static carried in the body of the person to perform the installation. Installation can be performed more safely if an anti-static wrist strap is worn. Touching the card without first releasing this static may cause malfunctioning.

Do not allow the metal part of the card come in contact with any other metal parts.

Rear panel

Optional card slot cover

SDI card

2 screws (6 mm) 4 screws (8 mm)

1 Turn the power to the camera off and remove any cables which are connected to the power connector or other connectors.

2 Loosen the 4 screws (8 mm) on the rear panel of the camera, then remove the panel itself.

3 Loosen the 2 screws (6 mm) on the optional card slot cover, then remove the cover.

4

5 Firmly tighten the 2 screws (6 mm) to the optional card slot.

6 Firmly secure the rear panel with the

4 screws (8 mm).

Note

If the screws are misplaced, use the extra screws supplied with this product.

- (E) -