Introduction
Installing the SDI card in a convertible camera (such as the
Notes
The
When the SDI card unit is to be discarded at the end of its service life, ask a specialized contractor to dispose of it properly in order to protect the environment.
ENGLISH
Characteristics
Two signal outputs for SDI signals compliant with the EBU
200 m)
EDH (Error Detection and Handling) flags complying with the SMPTE RP165 standard can be added.
(A switch can be used to enable or disable the addition of these flags.)
An
The STANDBY/ON switch function of the viewfinder
Output signals (brightness and composite video signals) to the viewfinder can be switched using the menu settings.
Zebra pattern and safety zone displays appearing in the viewfinder can be switched using the menu settings.
The VIDEO ON/OFF switch function of the viewfinder
Precautions for use
When connecting or disconnecting a cable from any unit, ensure that the power to that unit is turned off.
Do not drop this product or subject it to strong shock or vibration, as this may cause it to malfunction.
Avoid using the unit in very humid or dusty locations, as this may cause it to malfunction.
Avoid using the product at a cold place below
- (E) -
