Operating Instructions
124
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
Setting Description
Server IP
Address or
Host
Name*1
• If you set a server IP address, set 4 numb ers (0—255) and 3
periods, such as "192.168.0.253". Note that "0.0.0.0" and
"255.255.255.255" are not available. Or set a host name (1—
255 characters).
• You can set an IPv6 address.
Port No. • Enter the number (1—65535). Usually set to 21.
Login ID*2 • If your ISP requires a login ID, set it (0—63 characters).
Password*2 • If your ISP requires a password, set it (0—63 characters).
Login
Timing • Select the login setting for the FT P server. If you set [One
Time] and the image buffer frequency value is set within 1
minute, the camera logs in to the server only once. This can
reduce transfer time.
Upload File
Name*1 • Set a file name on the FTP server to receive the transferred
files. Enter 1—234 characters. Entering "\" creates directories
for a file. (E.g. NetworkCamera\image)